FLUNA Silencer SET CLEANING

• Automatically cleans and degreases without residues.
• Easy to use.

USE:

Empty half of the concentrate bottle into an empty PVC tube that is part of the packaging and dilute in a ratio of 1:3 with water. This will give you 500 ml of cleaning solution. The entire concentrate bottle is sufficient for 1 liter of cleaning solution, which is 2 cleanings. If possible, disassemble the silencer and place it in the cleaning mixture tube. A non-disassemblable silencer can be placed in the tube whole and filled with cleaning solution. 

Exposure time depends on the degree of dirtiness and is from 0.5 to 2 hours. Cleaning is carried out automatically, but can be accelerated by shaking. When the cleaner starts to work, you will notice black dirt. Accessible areas can be cleaned with the included microfiber cloth. After the cleaning process, thoroughly rinse the silencer with clean water!

• With shaking and rinsing, dirt residues may still dissolve.
• Dry the silencer before reassembling.
• Check material compatibility before use! 

The set includes:

• Fluna SDR concentrate 250 ml (GCSDR0250)
• Microfiber cloth 40/40cm 
• PVC tube for cleaning silencer
• Instructions